Xfinity Routers are among the most popular networking devices today. If you have one, you can configure it in no time and access the internet using both your wired and Wi-Fi-enabled devices. However, instances might occur when you come across multiple issues with the device such as blinking of red light on the router, Xfinity Modem blinking orange, intermittent disconnections of the internet, and much more. In such cases, you might need to reset the router in order to get rid of the problem. Here, we will discuss how you can do that and will help you gather some valuable insights into using this networking device in an error-free way.
Locating the Router’s Reset Button
Before you reset the Xfinity Router, you must know where the reset button of the router is. You can locate the reset button at the rear end of the router. If you encounter any challenges while locating this, refer to the user manual that comes along with the router.
Upon completion of the router reset, you need to perform Xfinity Router login in order to reconfigure the device’s settings. As the reset erases all the previously configured settings of the router, it is recommended that you note down the existing router settings on a notepad, before performing the reset.
Stepwise Process to Reset Xfinity Router
Once you locate the reset button of your Xfinity Router, you can reset it by following some simple steps. You’ll need to reset the router in the below-mentioned cases:
- Forgot the router login credentials
- Router is blinking orange or red light
- Set up the router all over again
You can follow the below-mentioned steps to reset an Xfinity Router:
- Connect the router’s power adapter to an electric socket and turn on the router by pressing the power button.
- Ensure that the router’s LED light is lit.
- Locate the reset button.
- Use a pointed object, such as a paperclip to press and hold the reset button for about 10 seconds.
- Once the status lights of the router go off and the router restarts, the reset will be completed.
After resetting the router, you must login to the admin console to reconfigure the device. To start with, you need to connect the router to a computer either wirelessly or using an Ethernet cable. Once the connection is established, you can open the preferred web browser on the computer and browse the router’s IP address. Further, you need to enter the default login credentials of the router to gain access to the router management console. In case you encounter issues like blinking of a red light, you must know how to reboot Xfinity Router. To do this, simply press the router’s power button to turn it off and then disconnect the router’s power adapter from the electric socket.
Once you complete the series of steps mentioned above, connect the router’s power adapter back to the electric socket and press the power button to turn the device on. This way, you can regain access to the router admin panel and make necessary changes to the router settings.