When you are away from home, you usually access the internet services by your local Internet Service Provider. But, the Netgear WiFi router allows you to access a VPN connection at your own local internet service when you’re away from home. In other words, a VPN connection helps you to use those internet services at any geographic location that you use at home.
By default, the Netgear router allows you to access a VPN connection only to your home network. But, by tweaking the settings of your router by accessing the routerlogin.net setup wizard, you can enable the VPN on your Netgear router to allow the devices to access its services remotely. Let’s find out how.
Steps to Enable VPN on Your Netgear WiFi Router
Follow the instructions given below to allow VPN clients to use your home internet service:
-
Switch On Your Netgear Router
-
Plug your Netgear WiFi router into an electrical outlet.
-
Press the Power button.
-
Wait patiently for the power LED to turn solid green.
-
Connect Your WiFi Devices
-
Grab an Ethernet cable.
-
Connect one end to your Netgear router and another to the existing modem.
Note: You can also connect your WiFi devices using a wireless source.
-
Access Netgear Router Login Page
-
Now, switch on your computer.
-
Therafter, open a web browser like Google Chrome, Mozilla Firefox, Microsoft Edge, Apple Safari, etc.
-
Move to the address bar.
-
Type the default web address of your Netgear WiFi router into it.
-
Press the Enter key.
-
You will get redirected to the routerlogin page.
-
Log in to Your Netgear Router
-
Type the router’s default username and password into their respective fields.
-
Once done, click the Log In button.
-
You will be welcomed by the BASIC Home screen.
-
Go to the VPN Screen
-
Select the Advanced tab.
-
Move to the Advanced Setup option.
-
Click the VPN Service option.
-
The VPN screen will come into view.
-
Enable VPN Services
-
On the VPN screen, click the Enable VPN Service radio button.
-
Scroll down and select the All Sites on the Internet and Home Network radio button.
Note: By doing so, you will be able to access the internet services of your home network remotely alongwith those of the local internet service.
-
Lastly, save the settings by clicking the Apply button.
In this way, you can enable VPN services on your Netgear router and allow VPN clients to use home internet services. On the off chance, you come across any issue while doing so, consider the following points:
Points to Remember While Enabling VPN
-
Ensure that your Netgear router is plugged into an active electrical outlet. You can check it by looking at the status of the power LED. If it is not glowing green, it means the electrical outlet is damaged. In that case, consider plugging your router into another outlet.
-
The Ethernet cable you’ve used to connect the Netgear WiFi router and the modem should be damage-free and the connection should be finger-tight.
-
Temporarily disable firewall and antivirus software on your computer before accessing the Netgear router login page.
-
The web browser you are using to access the Netgear router setup wizard should be updated and free of cache, cookies, and browsing history.
-
Make sure to enter the router’s default username and password correctly as they are case-sensitive. Also, consider turning the Caps Lock key on your keyboard off while doing so.
To Sum Up
This was all about how to enable VPN on your Netgear WiFi router and allow the devices on the remote network to access the services of your home network. Hopefully, this thorough guide will help you do so with ease. Thanks for reading the article.