Spectrum Routers are known for their durability and cost-effectiveness. Once you install the router, you can start using both compatible wired and Wi-Fi-enabled devices to access the internet. Since the wireless method of accessing the internet is common these days, you might sometimes want to change WiFi name and password Spectrum to enhance the security of the wireless network. However, if you are new to routers, it might be challenging for you to change these details. Don’t worry! Here, we will guide you through the step-by-process of changing the Wi-Fi username and the password of a Spectrum Router following which you can strengthen the security of your wireless network. Read on!
Accessing the Router Admin Console
To change the setting of your wireless router, you must know how to access the admin console of the router. You need to first connect the router to a computer or any other compatible device using either an Ethernet cable or wirelessly. Once the devices are connected, you need to log in to Spectrum Router by following the steps mentioned under:
- Once the router and your computer are connected, open a web browser on the computer.
- Type the router’s IP address in the browser’s address bar and press Enter to open the router admin console. You can find the router’s IP address in the user manual that comes along with the router.
- Enter the router login credentials in the required field. If you haven’t changed them, enter the default login details and click on ‘Login’ to gain access to the router admin console.
Stepwise Process to Change the Wi-Fi Username and Password
Now that you are aware of the series of steps involved in connecting the router to a computer and accessing the router management console, read on to explore how to change the wireless network name and the Wi-Fi password. Here’s how you can do this:
- While you are logged into the admin console of your Spectrum Router, click on the “Wireless” tab.
- Click on the “Wi-Fi Username” box and set the desired network name.
- Click on ‘Apply’ to save the changes.
- Now, to change the wireless password, click on the ‘Wi-Fi Password’ tab and set the desired password.
- Enter the new wireless password again in the required field.
- Click on ‘Apply’ to save the changes.
- Log out of the router management console.
Once you complete these steps, you can click on the wireless network icon on your device and search for the available wireless networks in range. Once you locate the newly set wireless network name, click on it and then provide the new Wi-Fi password to connect to the wireless network and access the internet. In case you ever see the Spectrum Router flashing red, check if the Ethernet cable connecting your router and the modem is in proper condition. If there’s any physical damage to the cable, replace it with a new one and check if the issue is resolved. In some cases, restarting the entire network also resolves such issues.