Each LED light on the Netgear Nighthawk router has a different meaning. That is why whenever anyone experiences any issue with their WiFi router, the first thing that should be checked is the status of the LED lights. These lights tell more about the WiFi and Ethernet connection, internet signal, devices connected to the router’s network, and much more. But, it can be more troublesome if the power LED on the Netgear Nighthawk router is blinking.
If you have performed Netgear Nighthawk setup and the power LED of your router is blinking, then we’ve got you covered. In this article, we will shed light on the various tips and tricks that will help you fix the blinking power LED issue with your Netgear router. So, read on.
Fixed: Netgear Router Blinking Power LED Issue
-
Reboot Your Netgear Router
The power LED on your Netgear Nighthawk router might be blinking due to technical glitches. But, don’t worry! It is common for networking devices to fall prey to technical glitches. They can be easily fixed by rebooting the router.
Rebooting the WiFi device is quite simple but effective. To reboot your Netgear Nighthawk router, unplug it from the wall outlet and let it stay without power for some time. Thereafter, plug it back into the wall outlet and press the Power button. Now, check if the power LED has become steady or not.
-
Check the Wall Outlet
If rebooting the router fails to bear any result, then chances are that your Netgear Nighthawk router is not receiving a consistent power supply. It can be due to a faulty wall outlet. So, we recommend you have a look at the wall outlet. In case it is of a damaged , consider plugging your Netgear Nighthawk router into another one.
Note: If you are using a surge protector to power up your Netgear Nighthawk router, then you’re following the wrong path. So, bypass the surge protector.
-
Verify the Ethernet Connection
You can fall victim to the blinking power LED issue with your Netgear Nighthawk router if the connection between your WiFi devices is poor. Perhaps, the Ethernet cable you’re using is damaged or the connection has become loose. In that case, we recommend you replace the Ethernet cable with a new one and make a finger-tight connection. Once done, check if the power LED on your Netgear Nighthawk router is still blinking. If yes, then it is time to move to the next troubleshooting hack.
-
Update the Firmware
Chances are that your Netgear router’s firmware is outdated that has led you to the ‘Netgear router blinking power LED’ issue. Therefore, we highly recommend you update the Netgear Nighthawk router’s firmware to its latest version as soon as possible.
If you are unaware of the firmware update process of the Netgear Nighthawk router, walk through the below-mentioned steps:
-
Ensure that your Netgear Nighthawk router is getting a fluctuation-free power supply.
-
Now, connect your Nighthawk router to the existing modem with an Ethernet cable.
-
Launch a web browser on your PC and access the Netgear Nighthawk login page.
-
Login to Nighthawk router using the default admin details.
-
On the BASIC Home screen, click Advanced > Administration > Firmware Update.
-
Your Netgear Nighthawk router will check if a new firmware version is available.
-
If a new version available, follow the on-screen instructions and let your router’s firmware get updated.
Note: You can also update the firmware of your router using the Netgear Nighthawk app.
In this way, you can update the firmware of your Netgear Nighthawk router to its latest version. Now, check if the power LED on your router is blinking.
-
Reset the Router
If all of the aforementioned hacks fail to bring you luck, then consider restoring your Netgear router to factory default settings. Doing so will wipe out all the customized settings from your WiFi device and will definitely fix the issue.
To reset the Netgear router, find the Reset button on your WiFi device and press it using a sharp object. Once your WiFi device resets, consider performing Netgear WiFi router setup from scratch.
Summing Up
This was all about how to fix the blinking power LED issue with your Netgear Nighthawk router. We hope that the aforementioned troubleshooting hacks will bring you success in fixing the issue.