Car Tire Maintenance By The Singh Auto Care Experts

Owning a car comes with certain responsibilities, and one of the biggest challenges is seeing that the vehicle always performs according to its full potential. The maximum output from our vehicle depends upon certain factors that even many car enthusiasts forget to pay attention to. Well, you must be thinking about maintenance. That’s right; maintenance plays a crucial role in the way our car performs on the road. When anyone talks about car maintenance, many things come to our mind, but for now, we will talk about car tyre maintenance as proper working tyres can make our journey a lot easier and safer. We will also dig in and explore the tips given by Singh Auto Care experts in this regard.

First of all:

Keep up proper inflation pressure in your tyres:

  1. Suitable inflation pressure is needed for giving you the best tyre performance, safety, and fuel economy. You should keep in mind to check your tyres when they are cool with an accurate tyre pressure gauge for at least a month. Also, here is a safety tip for you all: “Don’t check the tyres if they are hot; if necessary, add 4 to 5 PSI to the recommended pressure to find the exact pressure.”
  2. Maintain the inflation pressure in tyres at the recommended level:

Your tyre will last longer and stay durable if you maintain proper inflation pressure. If you do not take care of this, it will

  • Reduces load capacity
  • Allows excessive sidewall flexing
  • Increases rolling resistance
  • Heat and mechanical damage.

If you know, overinflation increases strictness that may cause an uncomfortable driving experience and produce unwanted vehicle vibration. It also increases the chances of impression damage.

  1. Don’t spin your tyres excessively.

Avoid unnecessary tyre spinning when your vehicle is stuck in a snowy, Icey, muddy place. This will cause tyre over-heating and irreversible damage. Use a gentle backwards and forward swinging motion to free your vehicle. You should not stay near or behind a tyre spinning at high speeds.

  1. Check your tyres for wear:

Change your tyres from service when they reach 1.6mm thin in tread depth. All new tyres have tread wear needles that appear as smooth banks in the tread grooves when they wear to 1.6mm level. Raining weather accidents can happen while skidding with bald or nearly plain tyres. Excessively damaged tyres are also more likely to undergo punctures (holes).

  1. Check your tyres for damage.

Frequent inspection of your tyres for marks of damage and their general condition is essential for safety. we often hear about so many accidents, especially on the highway, that takes place because people drive with cars whose tyres aren’t in good condition. So, for the sake of yourself, always double-check everything before you leave home.

  1. Don’t attempt to mount your tyres:

Serious injury can result from the explosion of tyre/rim gathering from improper swelling processes. You should keep in mind to follow your tyre manufacturer’s instructions and match tyre diameter to rim diameter. You have to watch that only a specially trained person is mounting tyres. Note that: “You should not mix tyres of different sizes and types on the same axle.” says Singh Auto Care experts

  1. Pay attention to Wheel alignment

It is the process to line up the wheels and axles correctly. It will safeguards that your car handgrips are at their optimum level, increasing safety as well as protecting tyres against premature wear and saving fuel. Wheel balancing balances the wheel and tyres. Your tyres bearings and suspension will be protected, and it will also help to prevent premature tyre wear and stop vibration.

  1. Post Puncture maintenance guide

Check tyres carefully for damages because of holes and impact. You should use new tubeless valves or new tubes while replacing the tubeless or tube-type tyres.


If you work for an AutoCare company, then before changing your tyres, refer to the vehicle’s owner’s guide and follow the manufacturer’s replacement tyre commendations before changing your tyres. Vehicle behaviour will be considerably affected by a change in tyre size or type. If you are selecting tyres that will differ from the original equipment size, grasp a professional installer to make sure that proper load-carrying capacity and pressure are selected. Do not surpass the maximum load capacity and inflation pressure registered on the sidewall of the tyre. When you are changing tyres, you must keep in mind to keep up the outside diameter and load-carrying ability of the original kit tyre.

We can conclude the above discussion by summarizing car maintenance tips given by Singh Auto Care experts in few points, which are as follows.

  • Rotation(which is tyre should be rotated within the limit of 8000km to 10000kms)
  • Pressure(according to the label on the door)
  • Tread depth( minimum tread depth varies in between 1.5mm and 1.6mm)
  • Wheel alignment
  • Repair and replacement in time

Leave a Reply

Your email address will not be published. Required fields are marked *